Lat 26° Teak Seal delivers months of UV protection that hinders the oxidation (greying) of teak. This water based teak sealer repels salt water, dirt, mildew, & other outside factors from teak decks, outdoor teak furniture, and other wood surfaces. It can be applied on bare teak for a natural finish or over teak oil and other treatments. Teak Seal provides three months of protection. Older teak may require a teak oil prior to application.
DIRECTIONS
Thoroughly clean the wood surface, removing all dirt with Lat 26° Teak Clean. Surface must be completely dry prior to application of Teak Seal. Before applying, shake the teak sealer well. Apply with a soft sponge or rag. For the first application apply multiple coatings until teak does not absorb sealer anymore. Wipe away any excess with a dry rag.
For recently sanded teak, be sure to prep with Teak Clean and Teak Bright to remove any dust and residue. Allow surface to dry completely then coat with Teak Seal.
Dry Time: Safe to walk on in 2 hours. Fully cured in 12 hours.
**If teak is slippery after applying Teak Seal** wait 24 hours and give your deck a washdown using Lat 26° boat soap to wash away any remaining residue
Caution: Always use Gloves when handling Lat 26° Teak Sealer.