Lat 26˚ Nano Ceramic® Coating is a marine grade UV protection solution designed to deliver professional gelcoat and paint protection. This coating forms a protective layer that repels water, dirt, grime, yellowing, and oxidation, while also providing a strong barrier against UV rays and liquids. Its superior water-beading capabilities ensure your surfaces maintain a fresh, new appearance. Professional grade ceramic coatings provide longer-lasting protection, usually lasting a year or more, in contrast to traditional waxes and sealants, which typically last around 3 to 4 months.
1 oz = 300 sq ft of coverage
No Certification Process is Needed with Lat 26° Nano Ceramic Coating!
However, we do STRONGLY recommend watching our instructional video below & visiting our Nano Ceramic FAQ page.
Prior to using Lat 26° Nano Ceramic, make sure the surface free of oxidation and swirl marks, then apply Lat 26° Surface Prep
Step by Step: How To Apply Ceramic Coating
Apply with a Foam Block or Microfiber Applicator pad. Wipe a thin coat on in one direction then allow the product to “flash” after about a minute in 80°F/26°C. ( Approximate flash times are provided- curing will occur more quickly in warmer conditions, while colder temperatures will require longer curing times.)
Wipe thoroughly with a new or clean microfiber rag to remove excess product and to activate shine continue wiping, “polishing” surface with same microfiber changing sides regularly until all residue “smear” is removed. Generally wiping surface can take 3-4 times longer than traditional wiping of sealants.
Allow 12 hours between coats and up to 72 hours for full cure before washing surface or allowing salt water or engine exhaust to get onto coating.
For ideal coverage, two coats of Nano Ceramic should be applied. For "problem" areas that may require extra protection, it is recommended to apply three coats of Lat 26˚ Nano Ceramic® Coating. When applying to porous surfaces, a heavier coating is required.